Home > Products > Pallet Jack > Manual Pallet Jack

China Manual Pallet Jack Manufacturers, Suppliers, Factory

1 What is the manual pallet jack?

 


Yiying, a distinguished manufacturer and supplier in China, offers a wide range of manual pallet jacks known for their exceptional quality and reliability. With three decades of experience in design and sales, Shanghai Yiying Hoisting Machinery Co., Ltd. provides comprehensive project management services, ensuring solutions for various customer needs in the industry. Our commitment extends to delivering high-quality manual pallet jack products that aid in attracting top-tier customers and rapidly expanding local market shares.

The HUGO® manual pallet jack, also referred to as a pallet pump, trolley, or scooter, is a crucial tool designed for lifting and moving pallets within warehouses or supermarkets. Operated using a tiller-like lever functioning as the pump handle, this equipment employs hydraulic oil release via a small handle on the tiller to facilitate the upward motion of the hand pallet truck. The hydraulic jack mechanism linked to the tiller raises the front wheel, allowing the fork to lift the load just enough to clear the floor for subsequent transportation. Manual pallet jacks, particularly useful in scenarios lacking forklift access or availability, are extensively used for pallet movement and organization within trailers.

The design of the HUGO® manual pallet jack typically includes a steering wheel at the front, while each fork is equipped with either a single wheel or two bogie wheels for efficient maneuverability and stability during operations. As a reputable factory, we offer spare parts at minimal prices and superior quality to ensure uninterrupted and reliable functioning of manual pallet jacks.



PRODUCT STRUCTURE DECOMPOSITION

 

1.hand shank desihned by ergonomics

2.manual pressure relief valve

3.Min.fork height/Max.fork height 85mm/25mm

4.electrostatic spraying surface

5.climbing wheel

6.bottom stiffener

7.PU wheel

8.integrated pouring cylinder

9.bold spring

 

2 Types of manual pallet trucks


HUGO® Manual pallet trucks,that's what we usually say manual pallet jacks, are divided into 2 tons, 2.5 tons and 3 tons according to different load capacities, PU wheels, nylon wheels and rubber wheels according to different wheels, and can also be divided into 1150*550mm and 1200*685mm according to different fork sizes. The specific parameter table is as follows.

 

 

1kg=2.205LB 1NCH=25.40MM

Model

WA

Capacity

Q(kg)

2000/2500/3000

Lowered fork height

h(mm)

80

75

steering wheel

mm

200

180

Fork Wheel Single

mm

80*93

74*93

fork wheel tandem

mm

74*93

74*70

Max.lift height

mm

200

200

Total height

mm

1232

1222

Overall Length

mm

1533/1603

1533/1603

Fork Length

mm

1150/1200

1150/1200

Width overall forks

mm

550/685

550/685

Ground clearance centre of wheelbase

mm

32

22

Aisle width for pallets 1000*1200 crossways

mm

1733/1803

1733/1803

Aisle width for pallets 800*1200 lengthways

mm

1783/1803

1783/1803

Turning Radius

mm

1265/1335

1265/1335

Service weight

kg

72-76.5

72-76.5



3 How to distinguish between good and bad manual pallet jack:

1. We can measure the thickness of the painted steel plate of the manual pallet jack, usually the high-quality manual pallet truck can reach 3.75mm or even 4mm after painting, while the thickness of the painted steel plate of the inferior manual pallet jack is 3.5mm or even 3mm. It is easy to cause the steel plate itself to be easily broken, bringing customer complaints, which in turn brings endless troubles to the sellers

2. Generally, the diameter of the pump core of the 2.5-ton manual pallet jack should be 40mm, but some suppliers will make the pump core diameter of the 2.5-ton manual pallet jack 35mm in order to reduce the cost. The pump core diameter is not as large as the pump core diameter of 40mm.

3. In addition to the thickness of the steel plate that can reach 4mm, the high-quality manual pallet truck has two reinforcements up to 80cm under each fork. In order to provide buyers with a beautiful price, some suppliers do not Reinforcement will be done.

4. The process of full welding can not only increase the appearance of the product, but also increase the load capacity of the manual pallet jack. You can also judge the quality of the product by observing whether the manual pallet jack has been processed by the full welding process.


4 How to install the manual pallet jack 

1. Gently pull out the cotter pin of manual pallet jack on the street of the forklift mounting handle.

2. Remove the pin at the joint.

3. Install the handle at the interface.

4. the handle is installed, install the cotter pin, and slightly bend the opening on one side to prevent the cotter pin from falling off.

5. Install the chain, and the chain should pass through the pin.

6. The effect diagram after the chain is installed.

7. After the handle is installed, unplug the long pin.

8. After unplugging the long pin, the hydraulic forklift can be used. Pull down the wrench on the handle and pull the handle up and down to achieve the lift of the fork.

9. Turn the wrench to the horizontal, then step on the control brake of the forklift, and the fork can also be lowered to a low lifting height.

 

 

5 Troubleshooting of manual hydraulic trucks


When utilizing a manual hydraulic truck, encountering an issue where it cannot be fully lowered to the ground is quite common. This problem often arises due to a faulty pressure relief valve, especially when it becomes blocked. In such cases, a straightforward solution involves cleaning the pressure relief valve. However, if upon inspection, the valve isn't obstructed but exhibits signs of wear or damage due to extended usage, it's advisable to replace it with a new valve to restore functionality.

Another scenario observed with manual hydraulic trucks is when one side lowers properly while the other remains elevated. This situation typically points to transmission component issues. To address this, it's crucial to inspect the smoothness of rotation between the truck's front wheel bracket and the double link. If this inspection reveals no abnormalities, a further examination of the front bracket, bottom push rod, push rod, and rocker arm becomes necessary. Additionally, it's important to check for potential obstructions between the push rod and the truck body or between the wheels. In instances where hydraulic trucks experience this issue, it's often due to overloading, which can lead to structural deformation of the truck's wheel frame or damage to a specific component.






View as  
 
Hand Pallet Truck 2.5 Ton

Hand Pallet Truck 2.5 Ton

The Hand Pallet Truck 2.5 Ton is a popular lifting equipment used in many industries. It is a simple and efficient tool that allows easy handling of goods in a warehouse, manufacturing facility, or any setting that requires the movement of heavy loads from one place to another. 

Read MoreSend Inquiry
Hydraulic Hand Pallet Jack

Hydraulic Hand Pallet Jack

Hydraulic Hand Pallet Jack The Hand Pallet Truck 2 Ton is a popular lifting equipment used in many industries. It is a simple and efficient tool that allows easy handling of goods in a warehouse, manufacturing facility, or any setting that requires the movement of heavy loads from one place to another. 

Read MoreSend Inquiry
Hand Pallet Jack 2 Ton

Hand Pallet Jack 2 Ton

Hand Pallet Jack 2 Ton The Hand Pallet Truck 2.5 Ton is a popular lifting equipment used in many industries. It is a simple and efficient tool that allows easy handling of goods in a warehouse, manufacturing facility, or any setting that requires the movement of heavy loads from one place to another. 

Read MoreSend Inquiry
manual hydraulic pallet truck

manual hydraulic pallet truck

manual hydraulic pallet truck The Hand Pallet Truck 2.5 Ton is a popular lifting equipment used in many industries. It is a simple and efficient tool that allows easy handling of goods in a warehouse, manufacturing facility, or any setting that requires the movement of heavy loads from one place to another. 

Read MoreSend Inquiry
Hand Pallet Truck

Hand Pallet Truck

The Hand Pallet Truck 2.5 Ton is a popular lifting equipment used in many industries. It is a simple and efficient tool that allows easy handling of goods in a warehouse, manufacturing facility, or any setting that requires the movement of heavy loads from one place to another. 

Read MoreSend Inquiry
2.5 ton Hand Pallet Jack

2.5 ton Hand Pallet Jack

2.5 ton Hand Pallet Jack The handling operation is completed by human pulling. When the manual pallet truck is in use, the fork carried by it is inserted into the pallet hole, and driven by the hydraulic system, the pallet cargo can be lifted and lowered.

Read MoreSend Inquiry
As a professional China Manual Pallet Jack manufacturers and suppliers, we provide customers with comprehensive project management services. Our products can be customized. Besides, our products also support wholesale. Reasonable price, On time delivery always is our tenet. You can rest assured to buy high quality Manual Pallet Jack from our factory. For more info, please contact us.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept